5 Types of Steel Pipes and Their Applications
Introduction: The Role of Steel Pipes in Modern Infrastructure
Steel pipes are the lifeline of global infrastructure-powering water supply, industrial production, energy transmission, and agricultural irrigation. For Hebei Huayang Steel Pipe Co., Ltd.-a leading manufacturer of electric resistance welded steel pipes-understanding the differences between steel pipe types and their applications is critical to delivering tailored solutions. Among the diverse steel pipe categories, electric resistance welded steel pipes (including ERW and HFW variants) dominate civil, industrial, and agricultural sectors due to their efficiency, cost-effectiveness, and adaptability.
To anchor the technical context: The majority of Huayang's product portfolio focuses on ERW and HFW technologies. What is erw pipe? It is an electric resistance welded steel pipe formed by medium-frequency resistance heat (1kHz-3kHz) to fuse steel coil edges, with erw pipe meaning emphasizing mass production efficiency that aligns with high-demand, low-to-medium pressure scenarios. For high-pressure critical applications, Huayang produces hfw steel pipes-a premium electric resistance welded steel pipe variant where hfw meaning refers to High-Frequency Welding (300kHz-500kHz), optimized for thick walls and extreme pressure. This article details 5 key types of electric resistance welded steel pipes (ERW and HFW-based) and their real-world applications, with a focus on Huayang's production expertise and project experience.

Type 1: ERW Thin-Wall Steel Pipes (Schedule 20-30) – For Low-Pressure, Cost-Sensitive Scenarios
ERW thin-wall steel pipes-defined by wall thickness (WT) ≤4mm and Schedule 20-30-are the most cost-effective variant of electric resistance welded steel pipes, tailored for low-pressure (≤1.0MPa) applications where weight and material efficiency are priorities.
Key Characteristics of ERW Thin-Wall Pipes
Dimensional and Performance Traits
Wall Thickness Range: 1.8mm-4.0mm, with outer diameter (OD) spanning 12.7mm-219mm. Common configurations include Φ25×2.77mm (Schedule 40, WT 2.77mm) and Φ60×3.2mm (Schedule 20, WT 3.2mm);
Pressure Capacity: ≤1.0MPa, suitable for gravity-fed or low-pressure pumped systems. Huayang's hydrostatic testing confirms these pipes withstand 1.5×rated pressure (≤1.5MPa) for 10 minutes with no leaks;
Material Selection: Low-carbon steel (Q235, ASTM A36) with C≤0.22%, ensuring good formability during ERW welding. The steel's tensile strength (400MPa-550MPa) balances durability and cost.
Production Advantages at Huayang
Huayang's ERW line is optimized for thin-wall pipe production:
High Efficiency: The continuous forming-welding process produces 400 tons of thin-wall pipes daily (e.g., Φ60×3.2mm Schedule 20), 30% faster than thick-wall alternatives. This meets large-scale project deadlines, such as the 2023 Hebei Wheat Plantation's 1,000-ton order delivered in 3 weeks;
Precision Control: Laser thickness gauges (accuracy ±0.01mm) monitor WT in real time, ensuring tolerance ±10% (e.g., Φ25×2.77mm pipes: 2.50mm-3.05mm). This precision avoids material waste while maintaining structural integrity.
Applications of ERW Thin-Wall Pipes
Agricultural Irrigation
Project Case: 2023 Hebei Wheat Plantation (5,000 acres) used 1,000 tons of Φ60×3.2mm Schedule 20 ERW pipes for low-pressure sprinkler systems (0.6MPa). The thin walls reduce material costs by 18% vs. Schedule 40, allowing the project to cover 20% more acreage. The smooth inner surface (Ra ≤1.6μm) ensures uniform water distribution, boosting wheat yield by 10%;
Key Advantage: Light weight (4.38kg/m for Φ60×3.2mm) simplifies on-site laying-2-person teams install 300m/day, 50% faster than heavier pipes.
Indoor Light-Duty Piping
Project Case: 2024 Shenzhen Apartment Project (5,000 units) installed 800 tons of Φ25×2.77mm Schedule 40 ERW pipes for indoor drainage and low-pressure water supply (≤0.6MPa). The thin walls fit in 100mm-wide wall cavities, avoiding costly structural modifications. After 6 months of use, the project reported zero leaks or blockages;
Customization: Huayang offers pre-cut lengths (2m-6m, tolerance ±2mm) for indoor projects, reducing on-site cutting waste by 80%.
Type 2: ERW Medium-Thick-Wall Steel Pipes (Schedule 40-60) – For Medium-Pressure Civil/Industrial Use
ERW medium-thick-wall steel pipes (WT 4mm-8mm, Schedule 40-60) are the most versatile variant of electric resistance welded steel pipes, balancing pressure capacity (1.0MPa-2.0MPa) with cost-effectiveness-ideal for civil infrastructure and light industrial applications.
Key Characteristics of ERW Medium-Thick-Wall Pipes
Dimensional and Performance Traits
Wall Thickness Range: 4.0mm-8.0mm, with OD spanning 50.8mm-323.9mm. Typical configurations include Φ108×4.5mm (Schedule 40, WT 4.5mm) and Φ219×7.11mm (Schedule 40, WT 7.11mm);
Pressure Capacity: 1.0MPa-2.0MPa, suitable for medium-pressure systems like urban water mains and industrial compressed air. Huayang's ASTM A53 Grade B pipes of this type have a tensile strength of 415MPa-550MPa, ensuring long-term stability;
Material Selection: Low-alloy steel (Q345, ASTM A53 Grade B) with better weld strength than thin-wall pipes-weld fusion rate ≥98% via ERW's medium-frequency current (2kHz).
Production Control at Huayang
Welding Parameter Optimization: For Φ108×4.5mm Schedule 40 pipes, Huayang uses 1000A current and 2.5MPa squeeze pressure-higher than thin-wall pipes-to ensure full weld penetration. The PLC system adjusts parameters in real time based on coil thickness;
Post-Weld Annealing: Batch annealing at 650℃-700℃ relieves weld stress, reducing heat-affected zone (HAZ) hardness from 230HV to ≤200HV. This prevents cracking during cold bending, critical for on-site installation.
Applications of ERW Medium-Thick-Wall Pipes
Urban Water Supply
Project Case: 2023 Shanxi Rural Water Supply Project (serving 20 villages) used 1,200 tons of Φ108×4.5mm Schedule 40 ERW pipes for secondary water supply (1.0MPa). The medium-thick walls resist soil corrosion (0.10mm/year rate) and ensure a 18-year design life. The pipes' OD tolerance (±0.1mm) ensures compatibility with water meters and valves;
Cost Advantage: Compared to seamless pipes of the same ,ERW medium-thick-wall pipes cost 30% less-saving the project 1.8 million yuan.
Industrial Compressed Air
Project Case: 2024 Tangshan Machinery Factory installed 600 tons of Φ114×6.02mm Schedule 40 ERW pipes (ASTM A53 Grade B) for 1.2MPa compressed air lines. The pipes maintain pressure fluctuation ±0.02MPa, ensuring stable tool performance. The smooth inner surface (Ra ≤1.6μm) minimizes pressure loss, reducing energy consumption by 5%;
Installation Efficiency: Despite being thicker than thin-wall pipes (16.8kg/m for Φ114×6.02mm), the pipes can still be handled by 2-person teams-avoiding the need for heavy lifting equipment.
Type 3: HFW High-Pressure Steel Pipes (Schedule 80-160) – For Critical Industrial High-Pressure Scenarios
HFW high-pressure steel pipes (WT ≥8mm, Schedule 80-160) are a premium variant of electric resistance welded steel pipes, designed for high-pressure (2.0MPa-4.0MPa) and high-temperature applications-relying on HFW's precision welding to ensure safety.
Key Characteristics of HFW High-Pressure Pipes
Dimensional and Performance Traits
Wall Thickness Range: 8.0mm-19.05mm, with OD spanning 88.9mm-323.9mm. Common configurations include Φ114×8.56mm (Schedule 80, WT 8.56mm) and Φ219×11.91mm (Schedule 80, WT 11.91mm);
Pressure Capacity: 2.0MPa-4.0MPa, suitable for oil/gas transmission, high-temperature steam, and chemical fluid transfer. Huayang's ASTM A106 Grade B HFW pipes have a pressure rating 25% higher than ERW pipes of the same gauge;
Welding Technology: HFW meaning refers to High-Frequency Welding (300kHz-500kHz) via induction heating-no direct electrode contact, creating a narrow HAZ (≤2mm) and weld strength ≥98% of the base metal.
Production Excellence at Huayang
Induction Coil Precision: A servo-driven system maintains the induction coil 1mm-2mm from the steel strip edge, ensuring uniform heating of thick walls. For Φ114×8.56mm Schedule 80 pipes, this reduces temperature variation to ±20℃, avoiding under-welding;
Strict Quality Testing: 100% ultrasonic flaw detection (UT) and 20% X-ray inspection-far more rigorous than ERW pipes. The 2023 Indonesian Oil Refinery's HFW pipe order had a 99.8% pass rate, with zero internal defects.
Applications of HFW High-Pressure Pipes
Oil/Gas Branch Lines
Project Case: 2023 Indonesian Oil Refinery used 300 tons of Φ114×8.56mm Schedule 80 HFW steel pipes (ASTM A106 Grade B) for 2.2MPa crude oil transfer. The pipes' thick walls (8.56mm) resist corrosion from crude oil impurities, and HFW's weld integrity prevents leaks-critical for hazardous fluid transmission. The project passed international oil industry audits (API 5L) with no findings;
High-Temperature Adaptability: The pipes withstand 120℃ crude oil temperatures without thermal deformation, thanks to HFW's post-weld annealing (720℃-750℃).
Power Plant Steam Lines
Project Case: 2024 Tangshan Thermal Power Plant installed 200 tons of Φ219×11.91mm Schedule 80 HFW steel pipes for 180℃, 1.8MPa steam lines. The pipes' HAZ hardness (≤200HV) prevents cracking under thermal cycling, a risk ERW pipes of the same gauge would face. After 12 months of operation, the plant reported no maintenance issues;
Material Advantage: ASTM A106 Grade B steel's low sulfur content (≤0.035%) reduces weld brittleness, ensuring long-term reliability in high-temperature environments.
Type 4: Galvanized ERW Steel Pipes – For Corrosion-Resistant Low-Medium Pressure Scenarios
Galvanized ERW steel pipes-ERW pipes with a zinc coating (hot-dip or electro-galvanized)-are a corrosion-resistant variant of electric resistance welded steel pipes, ideal for outdoor, underground, or humid environments where uncoated pipes would rust prematurely.
Key Characteristics of Galvanized ERW Pipes
Coating and Performance Traits
Coating Types:
Hot-Dip Galvanization (HDG): 80μm-120μm zinc coating, meeting ISO 1461 standards-provides sacrificial anode protection. Huayang's HDG pipes withstand 500-hour neutral salt spray testing (ISO 9227) without red rust;
Electro-Galvanization (EG): 10μm-20μm zinc coating, cheaper than HDG-suitable for indoor dry environments;
Base Pipe: ERW thin-wall (Schedule 20-30) or medium-thick-wall (Schedule 40) pipes, with WT 2.77mm-7.11mm. The base pipe's ERW weld is fully covered by zinc, preventing corrosion at the seam;
Pressure Capacity: Same as uncoated ERW pipes (≤2.0MPa), with no reduction from the zinc coating.
Galvanization Process at Huayang
Pre-Treatment: Pipes undergo degreasing (5% NaOH solution, 60℃-70℃) and pickling (15% H₂SO₄ solution) to remove oil and scale-critical for zinc adhesion. Any residual scale would cause "pinholes" in the coating;
Hot-Dip Process: Pipes are immersed in 450℃-460℃ molten zinc (99.99% pure) for 30-60 seconds. The high temperature creates a zinc-iron alloy layer (FeZn₇) beneath the pure zinc layer, enhancing coating durability. For Φ48×3.5mm Schedule 40 pipes, immersion time is 45 seconds to ensure uniform coating thickness.
Applications of Galvanized ERW Pipes
Outdoor Scaffolding
Project Case: 2024 Shenzhen Coastal Residential Project used 300 tons of Φ48×3.5mm HDG ERW pipes (Schedule 40) for construction scaffolding. The 100μm zinc coating resists sea breeze corrosion (salt content 0.05%), with no rust after 18 months of outdoor exposure. The pipes' load-bearing capacity (200kg/m) meets national scaffolding standards;
Cost Benefit: HDG ERW pipes have a service life of 15-20 years vs. 5-8 years for uncoated pipes-reducing scaffolding replacement costs by 60%.
Underground Irrigation
Project Case: 2023 Henan Vegetable Plant used 500 tons of Φ60×3.2mm HDG ERW pipes (Schedule 20) for buried drip irrigation lines (0.6MPa). The zinc coating resists soil moisture and minor acidity (pH 6.0-7.5), with a corrosion rate of 0.05mm/year. The pipes' smooth inner surface prevents clogging of drip emitters, ensuring uniform water supply to 1,000 acres of vegetables;
Installation Tip: Huayang recommends wrapping pipe joints with zinc-rich tape to prevent corrosion at connection points-an extra step that extended joint life by 5 years in the Henan project.

Type 5: Anti-Corrosion Coated ERW Steel Pipes – For Chemical and Seawater Environments
Anti-corrosion coated ERW steel pipes-ERW pipes with epoxy, polyethylene (PE), or fusion-bonded epoxy (FBE) coatings-are a specialized variant of electric resistance welded steel pipes, designed for highly corrosive environments like chemical plants, seawater systems, and acidic/alkaline soil.
Key Characteristics of Anti-Corrosion Coated ERW Pipes
Coating and Performance Traits
Coating Types:
Epoxy Coating: 50μm-100μm thick, chemical-resistant-ideal for acidic/alkaline fluids (pH 2-12). Huayang's epoxy-coated pipes meet DIN 30670 standards;
FBE Coating: 300μm-500μm thick, heat-resistant (up to 120℃)-suitable for high-temperature chemical lines;
PE Coating: 2mm-3mm thick, impact-resistant-ideal for buried pipelines in rocky soil, resisting damage during backfilling;
Base Pipe: ERW medium-thick-wall pipes (Schedule 40-60) with WT 4.0mm-8.0mm, ensuring structural strength while the coating handles corrosion. The ERW weld is ground smooth before coating to avoid coating gaps;
Chemical Resistance: Epoxy and FBE coatings resist concentrated acids (e.g., 10% sulfuric acid) and alkalis (e.g., 20% sodium hydroxide), making them suitable for chemical fluid transfer.
Anti-Corrosion Coating Process at Huayang
Surface Preparation: Pipes undergo shot blasting (Sa 2.5 grade) to remove rust and mill scale, creating a rough surface (Ra 50μm-80μm) for better coating adhesion. This step is critical-poor surface preparation causes 80% of coating failures;
Coating Application:
Epoxy/FBE: Applied via electrostatic spraying at 180℃-220℃, ensuring uniform coverage (±5μm tolerance). For Φ159×6.0mm pipes, Huayang uses a 2-nozzle system to cover both inner and outer walls;
PE: Extruded onto preheated pipes (200℃-220℃) to form a seamless layer. The PE coating's thickness is controlled via extrusion speed (1m/min for 2mm thickness);
Curing and Inspection: Coated pipes are cured in an oven (180℃ for 15 minutes) and undergo spark testing (30kV) to detect pinholes. Huayang's coated pipes have a 99.7% pass rate in spark testing.
Applications of Anti-Corrosion Coated ERW Pipes
Chemical Plant Fluid Transfer
Project Case: 2024 Shandong Chemical Plant used 300 tons of Φ159×6.0mm epoxy-coated ERW pipes (Schedule 40) for 1.2MPa dilute sulfuric acid (10%) transfer. The epoxy coating (80μm) resisted acid corrosion, with no coating peeling or wall thinning after 12 months of operation. The pipes' smooth inner surface (Ra ≤0.8μm) prevented acid residue buildup, simplifying cleaning;
Safety Advantage: The coating acts as a secondary barrier-even if the steel base is scratched, the epoxy prevents direct contact between acid and steel, avoiding leaks.
Seawater Desalination Systems
Project Case: 2023 Coastal Desalination Plant installed 400 tons of Φ219×7.11mm FBE-coated ERW pipes (Schedule 40) for seawater intake lines (0.8MPa). The FBE coating (400μm) withstood high-salt seawater (3.5% salinity) and biofouling, with a corrosion rate of 0.02mm/year. The pipes' heat resistance (up to 120℃) also made them suitable for post-desalination warm water transfer;
Cost Comparison: FBE-coated ERW pipes cost 20% less than stainless steel pipes of the same 规格,saving the plant 800,000 yuan.
Acidic Soil Underground Pipes
Project Case: 2024 Yunnan Mining Project used 200 tons of Φ114×6.02mm PE-coated ERW pipes (Schedule 40) for buried tailings water transfer (pH 4.5). The PE coating (2.5mm) resisted acidic soil corrosion and rocky backfill damage, with no leaks reported after 8 months. The pipes' flexibility (PE coating's elongation at break ≥300%) also absorbed soil settlement, avoiding cracking;
Installation Support: Huayang provided on-site training for joint coating, ensuring pipe connections had the same corrosion resistance as the main pipe.
Conclusion: Choosing the Right Electric Resistance Welded Steel Pipe for Every Scenario
The 5 types of electric resistance welded steel pipes detailed in this article-ERW thin-wall, ERW medium-thick-wall, HFW high-pressure, galvanized ERW, and anti-corrosion coated ERW-each fill a unique niche in civil, industrial, agricultural, and energy sectors. Their success lies in aligning technology (ERW for efficiency, HFW for precision) with application needs (low pressure vs. high pressure, dry vs. corrosive environments).
For Hebei Huayang Steel Pipe Co., Ltd., these pipe types represent its commitment to tailored solutions:
ERW thin-wall pipes deliver cost savings for agricultural and indoor projects;
ERW medium-thick-wall pipes balance versatility and performance for civil infrastructure;
HFW high-pressure pipes ensure safety for critical industrial scenarios;
Galvanized ERW pipes add corrosion resistance for outdoor/underground use;
Anti-corrosion coated ERW pipes tackle extreme environments like chemical plants and seawater systems.
By leveraging erw pipe meaning (mass efficiency) and hfw meaning (precision welding), and combining them with surface treatments and strict quality control, Huayang ensures its electric resistance welded steel pipes meet the diverse needs of global customers. Whether it's a 1,000-ton agricultural irrigation order or a 300-ton chemical fluid transfer project, the key to success is selecting the pipe type that matches pressure, environment, and cost requirements-something Huayang's technical team stands ready to support.
As global infrastructure demands grow more complex-with a focus on durability, sustainability, and cost-efficiency-these 5 pipe types will remain the backbone of Huayang's product portfolio, reinforcing its position as a trusted manufacturer of electric resistance welded steel pipes worldwide.


