Machining of Submerged Arc Welded Steel Pipe Groove
The groove machining of submerged arc welded steel pipe is to meet the requirements of butt welding process, and to machine the parts to be welded at the pipe end into grooves with certain geometric shapes. This kind of groove is the compound groove at the pipe end, which is usually composed of multiple groove surfaces and angles. According to SY/T 5037-2018 standard, for flat-ended steel pipes with wall thickness greater than 3.2mm, the pipe end should be welded with a groove angle of 30, an upper deviation of 50, a lower deviation of 0 and a blunt edge of 1.6 mmplus or minus 0.8 mm.
In the actual machining process, copying cutting and compound groove internal and external copying cutting methods are adopted. By designing the cutting parameters and cutter geometry angle, the internal copying mechanism and external copying mechanism are added to the steel pipe chamfering machine in JCO production line, and the combined cutting method of internal and external copying, multiple copying wheels and chamfering knives is adopted to complete the composite groove cutting of thick steel pipe. This method can reduce the cutting force, realize the combined machining of thick-walled compound groove with internal and external profiling tools, ensure the geometric accuracy of the designed groove and improve the production efficiency. In a word, the groove machining of submerged arc welded steel pipe is a complex and accurate process, involving a variety of process parameters and equipment configuration to ensure the quality and performance of the final product.


